Car interior plastica repair?

plastic polish for car interior

Car interior plastic repair?

plastic restore

plastic restore

REPAIR PLASTIC CAR INTERIOR WITH THEIR HANDS
Car interior plastica repair.
The most detailed description: repair plastic car interior with their hands from a professional master for his readers with photos and videos from all corners of the network on one resource. Probably every motorist faced with the problem of damage to the plastic interior of the car. Read further Unsightly appearance of the car, which becomes a consequence of these damages, always want to fix as soon as possible. Today we will learn to perform repair of plastic of the car with our own hands. In our example, we will consider a slight damage to the plastic and the process of repairing it on their own.
repair car interior plastic

repair car interior plastic 

After that, once again you need to sand everything level with the surface. Next, using degreaser Spray, it is necessary to decrease the surface. The process of filling the damage with a Beagle must be repeated until the hole on the plastic is completely filled. Do not forget to apply the curing agent. Again, we clean and wipe with a cloth the place of damage. The next step is to prepare the repair site for painting. For this purpose, it is necessary to mask all non-mounted places by means of a masking tape. Using the Texture Coating tool, it is necessary to restore the texture of the surface. To do this, apply it to the damaged area. Next, we need to prepare the paint. The sequence of actions should be as follows: Select the desired color by the number of the layout; Mix the pigments in the ratio specified in the formula. In this mixture will need add a bit water, roughly 5%, for convenience mixing and correct consistency; After testing the paint on an inconspicuous area of plastic, bring the color to full compliance with the sample (this involves adding pigments to the paint, which is not enough, for this we use a step of 0.5 ml, which is approximately 2-3 drops).
restore car interior

restore car interior

Next, you will need to prepare an additive to the paint. For this purpose, a clean container is suitable, in which you need to add Cross-Linker Plastic, in the amount of 2% of the volume of paint and water, about 8% of the amount of paint, at room temperature. It’s all mixed (without paint). Should tickles additive, 10% from volume of paint, i.e., 10 ml. This additive improves properties paint and makes it is more resistant to Erasure. This additive is added to the paint and mix thoroughly (1 minute).
In addition, you will need to prepare another matte or glossy additive. Depending on the texture of the plastic element, which can be: glossy, semi-gloss, semi-Matt or matte, the desired additive is used in a certain proportion. For example: glossy texture (High Gloss) no more than 10% of the amount of paint; semi-gloss (High Gloss) not more than 5% of the amount of paint; semi-matte (Low Laster) no more than 10% of the amount of paint; matte (Satin Gloss) no more than 10% of the paint volume. The process of preparing the additive: in an empty container, pour the selected additive in the amount described above. Also, add no more than 10% water at room temperature. Mix well (1 minute). This additive is added to the paint and stir again for the same time. Paint is ready. We should get a paint with a catalyst and a texture additive. Fill the paint in the gun. You can use paint on plastic. The condition of the car interior excites motorists no less than the appearance of the paintwork of the body.
And since, plastic polish for car interior, 
is one of the main materials on the basis of which the interior, its restoration is an important issue for owners of vehicles. To do this work with your own hands will not be difficult if you know the basic methods that are used to repair the cabin. You can simply replace the part, but some plastic elements are very expensive, so in many cases it is more profitable to return them to their former appearance.
plastic polish for car interior

plastic polish for car interior

Among car enthusiasts, there are several popular ways to extend the life of plastic interior parts. Many prefer to contact specialized services, where the restoration of the appearance of plastic is entrusted to professionals. However, if desired, much can be done with their own hands. There are three main ways to make plastic parts look attractive: the application of special paint; skin tightening or replacement; pasting film; grinding with heating. Each of these methods should be considered in more detail. One of the easiest ways to return the plastic interior of the car an attractive look is painting. For the implementation of such repairs with their own hands will need the following materials: special paint for plastic; primer; lacquer; sandpaper with a fine grain; special putty for plastic; a set of tools for disassembly of the cabin. First, you need to dismantle the part to be restored. At the same time, it is preferable to use special tools so as not to add new scratches and scuffs to the surface of the plastic. Dismantled parts are thoroughly cleaned of dirt and dust, and then degreased safe for plastic means. If there are very deep scratches on the surface, they can be carefully sealed with putty. After that, the details of the car interior are cleaned with sandpaper with fine grain.
This should be done very carefully, especially if the plastic surface has a corrugated structure. When painting parts with a complex and deep pattern, it is better to skip the grinding process, immediately proceeding to the next stage of repair. Every detail is primed, painted and varnished. The primer is applied in two or three layers, and after its application, you should carefully inspect the surface in good light. If there are defects, they are either ground or eliminated with putty. Paint as well as varnish is applied in several layers.
plastic polish for car interior

plastic polish for car interior

At the end of the work, the parts are dried, installed in their places and polished. Read also: Repair computer keyboard with their hands’ Video (click to play). One of the most expensive ways to restore the plastic interior of the car – is a skin tightening or a substitute. To work you need to prepare: fitting material; special glue; stationery knife and scissors; a tool for dismantling plastic parts from the cabin. Salon, as in the previous version, it is necessary to disassemble. Individual elements are washed, dried and degreased. After that, you should make the cutting of the material for the skin, for which the skin or its substitute is applied to the part and marked with a marker along the contour. Under this on the edges of the need to leave supply in a couple of centimeters.
The skin is then cut out and pasted onto the plastic. It is convenient to level the material laid on glue with a rubber roller, the edges of the skin are wrapped and glued on the reverse side, the excess is cut off. After laying, the parts are left to dry, then carefully mounted in the car interior. In those places where adjacent elements are installed tightly to each other, the skin is not wrapped, but simply neatly trimmed along the contour and carefully glued. Another easy way to restore the plastic interior is pasting vinyl film. The following materials and tools are needed for the work: vinyl film of the desired color or carbon; a sharp hobby knife; construction hairdryer with power adjustment; plastic or silicone spatulas; rubber roller. The interior is disassembled and prepared in the same way as described above, after which the material is painted. To apply the film to the part, the substrate is removed from it, after which it is applied to the surface. Then, with the help of a construction dryer, the material is heated and smoothed either with special spatulas or with a rubber roller.
auto interior plastic paint

auto interior plastic paint

The urther sequence of actions is similar to repair when painting or hauling. The cheapest and fastest way to restore plastic parts of the car interior is grinding with warming up. This method is suitable only for slightly damaged surfaces.
Special care should be taken if the plastic has a corrugated structure. For this work you will need: construction hairdryer; sandpaper; Terry towel; means for cleaning and degreasing plastic. To restore the part in this way, nothing to remove and disassemble is not necessary.
This is especially true for those car owners who do not want to spend a lot of time working. This method will also be appreciated by those who in the cabin parts are removed with certain difficulties, car interior plastica repair. 

Leave a Reply

Your email address will not be published. Required fields are marked *