Leather repair car interior?
Leather repair car interior, we will try to answer the question: repair leather car interior with their hands on the recommendations of a genuine master with the most detailed description. Interior repair
Before proceeding to the restoration, determine the level of damage to the skin of the car interior. Most often, restoration requires no more than painting. However, often on the material of the skin, there are traces of cigarette burns, scratches, deep cuts or scuffs. In this case, more detailed processing and restoration of leather parts will be required. In rare cases, often associated with the long life of the car, a complete replacement of the upholstery is required. If you think that your case requires a complete restoration, then, without the skills, do not try to spend it yourself – contact the auto shop.
Interior repair, but of course an easy way to go to the workshop and pay money to get a result, but we are not looking for quick solutions. Therefore, we try to create the same robot with our own hands.
In this article, we will look at ways to restore the interior of the car with their hands. These methods are applicable in the case of minor damage, which can cope with any car owner in the presence of the necessary tools.
To paint the leather material you do not need a large number of tools. If you choose a paint in the form of a paste or cream, you may need a foam sponge, a cotton swab or a thin fabric material, a brush with soft bristles. Spray paint does not require anything other than paper or fabric that you protect areas that do not require painting. Steps to restoring a car, you can create a good robot with minimal effort, spending a little time and a little cost.
If a deeper restoration, you may need the following tools:
fine-grained sandpaper (M20);
iron (it is not advisable to use an iron with a metal sole);
Regardless of what type of restoration is required upholstery of your car (repair or painting), first of all you should clean the interior of personal belongings and other interior items. After that, the interior should be washed and only then in good daylight to inspect the interior of the machine.
Once you have formed an opinion about the extent of skin damage, decide whether you will dismantle the damaged parts. On the one hand, it is much more convenient to work in an open space, so you can ensure good access to light, and the car-the absence of chemical odors in the cabin. On the other – when dismantling the elements, you can not only damage other parts of the upholstery but also disrupt the mechanisms of operation of one or another part of the machine.
After all the above manipulations have been carried out, clean the surfaces that you plan to undergo restoration.
To do this, use any detergent to clean the surface, and then gently wipe the place that you want to restore, alcohol-containing solution. Keep in mind that some solutions may contain not only alcohol, but also chemicals that can further damage the surface. So first check the action of the composition on a small, inconspicuous area of the skin.
After cleaning and disinfection have been carried out, the defect should be treated with sandpaper. Once you have completed this step, you can proceed to a more detailed process of restoring the interior trim of the car.
After finishing the stage of preliminary preparation of the restored surface, check the availability of all necessary means for restoration.
If you decide to limit yourself to painting the upholstery, you will need paint and colorless varnish. As already mentioned, the paint can be pasty, creamy and in aerosol cans.
As for the varnish, the choice should be stopped on a two-component polyurethane varnish for leather surfaces. And if you decide to provide additional protection to the salon, you can always find in specialized stores substances that form a protective layer against moisture, dust, and ultraviolet radiation.
In order to repair the deeper defects of the skin will require funds that you can easily find in your garage or buy in specialty stores.
Among these they must be:
“liquid leather” (a special substance that imitates the surface of a leather product);
liquid gel, with which you will be able to repeat the pattern of the “native” skin on the restored site.
If you are the happy owner of sewing equipment and skills of the cutter, then it is in your power to carry out a complete tightening of the car interior yourself. However, the process is time-consuming and energy-consuming.
You can carry out the chair tightening as follows:
Remove the seats from the vehicle.
Remove the old upholstery.
Remove the measurements from the sensors or use the old material as a pattern. If you are not satisfied with the geometry of the old skin, you can carve something to your liking.
Sew the new upholstery and pull it back over the seats.
Ceiling hauling is easier, because the patterns are simpler, compared to the patterns of the upholstery of the chairs. In addition to the fact that you need to dismantle the old material, and then fix the new one, you should take care of the presence of all the necessary slots for lighting parts.
In any case, the restoration of the interior of your car is not so much a painstaking and difficult work, how many pleasant cares about your favorite means of transportation.
From this video, you will learn how to repair and paint the skin of the car yourself.
During the operation of the machine wear not only mechanical components, but also the interior. Therefore, to maintain its performance and appearance periodically requires restoration. In the given article technologies of restoration of various elements of automobile salon from fabric, leather, plastic are considered.
Read also: Repair of led lamps of the era with their hands
Restoration of the salon with their own hands requires the use of special tools. You can buy them on the car markets and in-car shops both separately and in the form of professional sets, which is most convenient. The cost of such sets is determined by the manufacturer and the number of tools. The most sets include the tools to remove the sheathing and interior parts such as moldings, door cards, radio, other elements of the dashboard. Minimal car interior restoration kits include polyurethane blades for dismantling plastic parts, keys for removing climate control and a fork for removing pistons. These tools are universal, that is, suitable for most cars.
In addition to tools, the restoration of the salon with their own hands requires materials. Their type is determined by the initial materials of the car interior. So, to restore the fabric interior usually requires the same material, while the repair of the leather interior is carried out with the use of special compounds called liquid skin, and the restoration of plastic is carried out using a gel plasticizer.
Regardless of the type of work planned, first of all, it is necessary to clean the interior of the car from all contaminants. After that, you need to inspect the entire interior, as this can be detected damage not noticed initially. In this regard, the scope and technology of repair can be changed, and on the basis of this, the user can make an estimate of the cost of materials and tools.
The most common plastic parts of the car interior are damaged in the form of scratches. Restoration of these interior elements includes several stages:
In the first of them, the damaged areas of plastic are filled with a specialized polymer mixture.
After that, you need to restore the original pattern on the workpiece. To do this, a gel solution is applied to its neighboring area, which after polymerization gives a cast of the texture.
Then it is applied to the damaged part of the part until the polymer composition dries completely.
At the final stage, the restored section of plastic is painted in the original color of the part.
In case of presence on plastic details of a large number of scratches at repair, it is expedient to use a method of the damaged detail skin, vinyl or any other material, leather repair car interior.