Best trailer brake controllers

Best trailer brake controllers

We started by choosing brake controllers that were thoroughly tested and praised in each of two categories — proportional brake controllers and time-based brake controllers.  Although the use of a proportional braking controller is more popular, time-based braking has gained a significant number of fans.
Time-based units are generally cheaper than proportional, which may explain their popularity.  However, they require the driver to drive the vehicle differently when pulling the trailer.  Read the Buyer Guide above before deciding to purchase a controller based on time.
After we selected the units to be rated, we looked at the reviews with the lowest ratings for each line item to see if there were any complaints that, due to their frequency, need special mention in the detailed reviews.  In this case, there were no complaints worthy of mention.
Finally, we rated them for performance, efficiency and ease of use.  These are all highly rated items, and the number of stars assigned only shows how they compare to each other.

Top 14 best brake controllers

1) Draw-Tite 20191 I-Stop
I-Stop IQ,Electronic trailer brake control

Reviews,CURT 51140 TriFlex Electric Trailer,tow braking systems

Reviews,CURT 51140 TriFlex Electric Trailer,tow braking systems

Draw-Tite trailer brake controllers.
Built-in Plug & Play for 2-slot adapters.
Self-diagnosis functions will highlight LED readings when problems occur.
Enables boost function.
Works proportionally the other way around.

Snap-in mounting clip and accessories included.

Digital LED Indication.
The snap-on mounting clip allows the user to remove and store the control when not in use.
Limited Lifetime Warranty.

2) Tekonsha 80500 Pro Series POD
POD

previewProduct,Tekonsha 90195 P3 Electronic brake controlCheck price,brake controller wiring

previewProduct,Tekonsha 90195 P3 Electronic brake controlCheck price,brake controller wiring

Tekonsha best trailer brake controllers.
Brake Control, for trailers with 1 or 2 axles, with time synchronization POD (Power on Demand) is your best choice for single- or two-axle trailers … especially when your installation options are limited.  The POD can be mounted in any direction and has easy front access controls, even if it is mounted upside down.  POD is the perfect choice with almost vertical mounting surfaces.
Solid state Electronic.
Power on LED for proper communication between trailer and trailer.

Manual forward Control,electric rv.
Rugged, easy to mount chassis.
Mounting hardware included.
Smooth and easy installation.
Plug & Play function makes connecting fast and easy.
5 year limited Warranty.

3) Reese Towpower 74378 Pilot Brake Controller, Black

Hopkin 47297, INSIGHT Plug-in Simple brake controlCheck price,ford brake assist,brake control

Hopkin 47297, INSIGHT Plug-in Simple brake controlCheck price,ford brake assist,brake control

The Reese Towpower Pilot brake controller has flexible mounting options with a microprocessor that allows you to read data from the display, even if the controller is installed upside down.  Large easy-to-read display with two digital displays, properly connected controls, voltage output to the brakes and trailer connection.  Capable of handling up to three axle trailers.
Details:Smoke lens ideal for direct lighting, reese trailer brake controllers.
Can be installed upside down and still have a readable display.
Short circuit protection and ground loss.

 

Mounting bracket included for standard mounting.
Lifetime Limited Warranty. Best prices on trailer brake controllers? Follow the link below to find out the price.

4) TEKONSHA P3 BRAKE CONTROL + WIRING HARNESS FOR 95-09 DODGE RAM 1500 2500 3500 + DAKOTA

Hayes 81760, Engage Digital Time Based Brake controller,Best brake controller

Hayes 81760, Engage Digital Time Based Brake controller,Best brake controller

The device comes with a storage bag, and the device snaps into a bracket that mounts with .
In order for the breakaway system of the trailer to be reliably protected from external elements, the detachable switch of the trailer is equipped with a nylon housing that does not rust and does not corrode.
Absolute safety: the TEKONSHA, travel trailer brake controllers,trailer switch kit system is designed to engage the trailer brake when it is disconnected from the vehicle.

Ultimate Rugged Case: This reinforced plastic case is weatherproof and designed to provide maximum protection for the battery and charger inside.
Reliable power: The system also has a test button to ensure reliable charging.

5) CURT, Electric Trailer Brake Controller, Proportional

Hayes 81760, Engage Digital Time Based Brake controller,Best brake controller,Electric brake controllers, rv brakes

Hayes 81760, Engage Digital Time Based Brake controller,Best brake controller,Electric brake controllers, rv brakes

The Best Trailer Brake Controleers CURT.
Three-axis motion-sensitive accelerometer for highly sensitive soft stops.
The third axis provides dynamic power control when moving up or down a hill.
Nine levels of sensitivity adjustment for various loads or driving conditions.
User selectable output power and trailer brake Light.
Automatic alignment and calibration eliminate setup requirements.
Digital display shows power settings in increments of 0.1.
Built-in reverse polarity and short circuit protection.
Vehicle and trailer low voltage indicatori.
Compatible with low voltage, PWM, ABS, cruise control and hydraulic drive.
Mounted at different angles, above or below the dash to enhance ease of use.

 

Auto standby prevents battery drain after five minutes of inactivity.
Equipped with quick fork for quick and easy installation.
Limited Lifetime Warranty.
Notes:Includes mounting hardware.

6) Reese Towpower 83500 Brakeman Digital brake control

Reese Towpower 8508211, Proportional brake control-EVN, best brake controllers

Reese Towpower 8508211, Proportional brake control-EVN, best brake controllers

The Reese Brakeman digital brake controller is one of a kind and will not disappoint you. If you are looking for the best brake controller , you can also consider this particular model, as it is specially designed for trailers with 1 – 4 axles. The beauty of this model is that you don’t have to rely on guesswork when towing the trailer; it gives you absolute control of the brake adjustment with complete accuracy. As a result, you will be able to tow your trailer with more confidence.
The reason it is considered the best trailer brake controller is that you will be able to control the amount of and the braking speed that you want to apply. Depending on the specific situation, you can adjust the braking to soft, medium or even aggressive.

The brake controller is compatible with all anti-lock braking systems, which makes it useful for most trailers. Adjusting the power with the thumb wheel will make it easier for you to adjust the power you need when you press the brake pedal.
There is a digital output indicator that was included in the Reese brake controller. This will show all the diagnostics and warn you when there are any problems with the system.

The kit includes mounting hardware, and the entire installation process is quite simple and straightforward. It comes with a Plug and Play feature that will make the connection process quite fast and easy.Reese Towpower,best brake controllers.

 

You will also get pre-manual overload control, which is a safety mechanism, as well as an overload indicator. This ensures that you use the brake controller within its limits and extends its service life, while improving your safety.

7) Tekonsha,90195 P3 Electronic Brake Control

Tekonsha 9030, Voyager Electronic brake controlCheck price, How do trailer brake controllers work?

Tekonsha 9030, Voyager Electronic brake controlCheck price, How do trailer brake controllers work?

Tekonsha brake controllers.
This proportional unit is our choice for a better brake controller for many reasons.  It supports both electric and hydraulic braking.  In addition, it can store up to five different parameters for towing a trailer, which is very convenient if you pull several trailers or if other drivers also pull the trailer.  It controls the brakes of up to four axles.
When the trailer braking system is not working, a flashing red light is visible.  It has an LCD screen that is easy to read and supports English, French and Spanish.  It uses Plug-N-Play technology to simplify installation.  In addition to the conventional universal cable, a wide range of OEM cables is available.  All in all, this impressive feature list allows the driver to customize and save settings for an ideal trailer towing experience.

Despite all these great features, the system has two drawbacks.  Firstly, many drivers will not see the need for such a complex controller.  They just want to hook up the trailer and go.

They may prefer something that requires less customization.  The second drawback is also related to complexity.

Tekonsha, best brake controllers.
The presence of another highly interactive device on the dashboard increases the ability to be distracted while driving.  This becomes much more dangerous when towing a trailer.  Of course, if you get the best settings, there is no need to configure them along the way, which makes this not such a big problem.

 

PROFI:Good range and has a battery.
MINUSES:Some reviews say it’s too bulky to carry.

8) Impulse,best brake controllers

14 brake controllers and buying guide, trailer brake controllers, best trailer brake controllers, travel trailer brake controllers

14 brake controllers and buying guide,
trailer brake controllers,
best trailer brake controllers,
travel trailer brake controllers

Hopkins brake controllers reviews.
This proportional brake controller is the only one considered that has separate adjustment and display modules that are connected via the Smart-Box installed under the dashboard.  When the switches and display are in the same device, the installation location becomes a problem.
If you install it where it will be easy to see, unit switches may be difficult to access.  If you install it where the switches are easily accessible, the display may not be clearly visible.  With INSIGHT brake controllers, the driver can place a dashboard display and switches anywhere easily accessible.  Installation is an easy task because it is done using double-sided tape instead of drill and screws.
In general, this three-component function makes this brake controller the safest of all the nodes considered.

 

He will handle the brakes on four axles.  The switches allow you to adjust the braking power, as well as the sensitivity to braking.  Jumper cables are available for a wide range of vehicles.

PROFI:Its power and sensitivity are digital, so you can fully trust.

MINUSES:It hurts a little LED display.

9) Tekonsha 9030 Voyager Electronic Brake Control

how trailer brake controllers work? how do brake controllers work? best brake controllers, brake controllers,

how trailer brake controllers work?
how do brake controllers work?
best brake controllers,
brake controllers,

Was the top-rated Tekonsha P3 better than you are prepared to handle?  Would you still like to get Tekonsha?  Look at Voyager.  Like the P3, the Voyager is a proportional brake controller.  All settings are made using two dials on the device.  Full instructions for setting up these dials can be found in the video, available on the Tekonsha Voyager website.

It can withstand brakes of up to four axles.  If you require a device that controls hydraulically actuated electric brakes, you should contact the manufacturer to confirm that this is possible.  Literature implies that electric hydraulic brakes MAY be supported.  As with the P3, setup is easier thanks to Plug-N-Play technology.

 

PROFI:Four-axis, draw tite brake controllers with, wide control range for easy setup and operation.

MINUSES:Confusing instructions because there seems to be a confusion between the level knob and the power knob.

10) Reese Towpower 8508211 Proportional Brake Control-EVN

tekonsha brake controllers, who installs brake controllers? brake controllers reviews, reese brake controllers

tekonsha brake controllers,
who installs brake controllers?
brake controllers reviews,
reese brake controllers

Reese brake controllers.
This proportional brake controller provides the soft stops you expect from a device of this type.  It controls the brakes on four axles.  There is an advanced acceleration function that provides initial acceleration when towing heavy loads.

The LED display serves two purposes.  First, it’s easy to see while you are setting up your device to handle the load.  Secondly, it displays diagnostic information so that you can monitor the status of the brake system.  Installation is very simple if you are buying a Reese.

 

Towpower with the right wiring harness for your vehicle, prodigy trailer brake controllers.

PROFI:No need to drill bracket.

MINUSES:Sometimes it can be un reliable.

11) CURT 51110 Venturer Electric trailer brake controller

draw tite brake controllers, prodigy trailer brake controllers, rv brake controllers, prodigy brake controllers

draw tite brake controllers,
prodigy trailer brake controllers,
rv brake controllers,
prodigy brake controllers

CURT best trailer brake CONTROLLERS.
Although it is number five out of seven, it is the highest rated temporary brake controller.  Remember that the time-based method of braking the controller is based on how long your foot has been depressed and not on your deceleration speed.

The driver can set the maximum amount of brake pressure to be applied and how long it takes to reach this maximum pressure from the moment the brake pedal is depressed.  This braking system will require you to change the way you drive when you pull the trailer.  We will discuss this in more detail in the Buyer Guide section below.
The LED indicator bar shows the driver how much energy is applied to the brakes.  This device can handle up to three axes.

Most devices contain moving parts, so there are right and wrong ways to install them,curt brake controllers. However, this device does not have moving parts, so you can install it anywhere and at any angle.  The only requirement is that the driver must see and adjust it.

 

PROFI:It can control almost any trailer that has 2 to 6 electric brakes, and the manual control function allows you to activate brake lights.
MINUSES:Some reviews say that it is difficult for them to adjust the level of sensitivity.

12) Draw-Tite 5504 Activator IV Electronic Brake Control

best trailer brake controllers, electric brake controllers, trailer brake controllers reviews,

best trailer brake controllers,
electric brake controllers,
trailer brake controllers reviews,

Draw-Tite electric brake controllers.
This time-based brake controller can be installed anywhere and in any orientation, provided that the driver can see and control it from where it was installed.  Adjustments to increase or decrease the gain (maximum pressure in the trailer brake) and timing (response time) are easily accessible and controlled by the driver.
There is also a switch that allows the driver to manually engage the brakes to the maximum braking pressure specified by the gain settings.  This manual switch alleviates some of the problems associated with time-based brakes, but they still cause concern.

It has a digital display that shows the status of the brake system, as well as gain and timing settings.  The device supports up to four axes, and the Plug-N-Play function simplifies installation.

PROFI:Exit indicator and digital output indicator with frontal display, which allows viewing from almost any angle.
MINUSES:Some reviews say that it was not possible to mount a thing under the dashboard and use the buttons.

13) Hayes 81760 Engage Digital Time Based Brake Controller

curt brake controllers, reese trailer brake controllers, pilot brake controllers

curt brake controllers,
reese trailer brake controllers,
pilot brake controllers

Hayes trailer brake controllers reviews.
This time controller is the last entry in our review.  Of all the time-based units considered, Engage provides the highest level of assistance thanks to the adjustment buttons and the most diagnostic information from the digital display.  Like all time-based controllers, the switches adjust the time and power settings.

They are good for initial setup and are easily accessible when the car is stopped.  However, changing these settings requires the driver to look at and manipulate the device.  This will be a difficult task when the car is in motion.
There is also a switch that allows the driver to manually engage the trailer brakes to the maximum braking capacity of the brakes.  It can be installed anywhere and in any position if the driver can see and adjust it.  The device can handle up to three axes.

 

PROFI:Quik Connect Installation – Save Time.
MINUSES:Some reviews say the connector is not compatible with the car.

14) Hayes 81760 best brake controller

Electric brake controllers, rv brakes. trailer brake controllers, how to fix trailer brakes, teckonsha, power tow brake brands, towing braked

Electric brake controllers, rv brakes.
trailer brake controllers,
how to fix trailer brakes,
teckonsha, power tow
brake brands, towing braked

Hayes, rv brake controllers.
If you have no good reason to get a time-based brake controller, spend a few extra dollars and get a proportional unit.  This is especially true if you pull trailers only occasionally.  To be glad that you have chosen a proportional brake controller is better than desired.

This time controller is the last entry in our review.  Of all the time-based units considered, electric rv engage provides the highest level of assistance thanks to the adjustment buttons and the most diagnostic information from the digital display.  Like all time-based controllers, the switches adjust the time and power settings.
They are good for initial setup and are easily accessible when the car is stopped.  However, changing these settings requires the driver to look at and manipulate the device.  This will be a difficult task when the car is in motion.
There is also a switch that allows the driver to manually engage the trailer brakes to the maximum braking capacity of the brakes.  It can be installed anywhere and in any position if the driver can see and adjust it.  The device can handle up to three axes.

PROFI:Quik Connect Installation – Save Time. Maximum towing capacity.

MINUSES:Some reviews say the connector is not compatible with the car.

Best Brake Controller: Buyer’s Guide

If you want to get the best brake controller, then this list should be your starting point.  You must find the right unit for you, which may or may not be the highest rated item on the list.

If you are a person who always pulls the same trailer and wants to know only that the trailer brake system is working, then there is a block for you.  If you are pulling several very different trailers, each of which has different braking characteristics, there is another unit for you.
How trailer brake controllers work?
If your need is somewhere in between, then there is another brake controller for you.  Regardless of your situation, there are two definitions that you must understand before you start shopping:

Proportional brake controller

This controller detects that your foot is on the brake and determines the deceleration rate.  If the towing vehicle slows down quickly, the controller feels the need for a quick stop and accordingly turns on the trailer brakes.
If it slows down slightly, it applies the trailer brakes accordingly.  The big advantage of this system is that it has enough information to interpret the situation you are in and provide the right amount of braking.

Time-based brake controller

This controller detects that your foot is on the brake, but it has no way of knowing what is happening on the road. Pilot brake controllers, a non-replacement part of your car. He cannot know the difference between normal or emergency braking.
All he knows is that when the driver presses the brake pedal, he activates the  brake brands at a low level.  Then, within a certain number of seconds, it increases the brake pressure to the maximum allowable value.  He does the same every time.

Time-based controller issues

As mentioned in the review section, there are some things you should know about driving techniques using a temporary brake controller.  Unlike the proportional brake controller, it does not feel the urgency of stopping.  It brakes the same every time you press the brake pedal.  In some situations, this can be dangerous.  here are some examples. Best prices on trailer brake controllers? Follow the link below to find out the price.

Gentle downward slope

You tow the trailer, and the road has a gentle slope.  If you have not towed a trailer, you can lightly press and hold the brake pedal so as not to gain speed during the descent.
If you do the same when towing a trailer, a time-based device only knows that you are holding the brake pedal.  It follows the instructions that you gave when setting up your trip.  When you first applied the brake pedal, the controller applied initial low pressure to the brake and began to increase it.Prodigy brake controllers, this is exactly the reliability of the ride is in them.
After the specified period of time has elapsed, the brake pressure has reached the maximum value that you allowed during the setting.  The trailer will then act as an anchor on the towing vehicle, holding it or even completely stopping it.  It can also damage the hitch.
The best, rv brake controllers way to deal with this situation is to release and press the brake pedal again every few seconds to reset the cycle of the towing braked controller and prevent excessive pressure in the brake system.  It may also be possible to engage the towing vehicle in a lower gear and allow the engine to assist with braking, but this depends on the vehicle, driver and situation.

Emergency stop

You tow the trailer, and something unexpected happens in front of you.  You need to quickly slow down or stop completely.  Of course, the brakes of the towing vehicle react immediately, but the trailer, as always, follows the instructions that you gave him when setting up the trip.  You know that these instructions will not cause the trailer to stop fast enough.  What do you do?  You have two options, none of which are very good.
Firstly, you can apply the brakes and hope that the brakes of the car – the tractor can hold both the vehicle and the trailer to the towing vehicle of the trailer, the brake catches up.  Remember that while you hold the brake pedal, the trailer pushes the towing vehicle forward and there is a risk of jolting.
In addition, in no case do not remove your foot from the brake, otherwise the controller control cycle will start again.  Secondly, you can use lightning reflexes for manual braking using the switch on the device.  Hopefully, you can do this while keeping your car and Iler Tra under control.

Features of Reese Towpower digital brake control 

The knurled wheel is designed to facilitate power adjustment. This way you will be able to select the braking power for the application from soft to aggressive.
The Reese Brakeman digital brake control can be installed at any angle, as it comes with the necessary mounting hardware and does not require any alignment.These elements should be used by workers, tow the brake systems, and it is recommended to replace them frequently.
It has a “plug and play”function that provides a smooth and fast installation process that does not require any special skills.
The digital controls on the Reese brake controller are easily accessible, and this will provide you with absolute control and accuracy.
This is a brake controller that works with anti-lock braking systems and is designed for trailers with 1 – 4 axles.

 

How do I install the trailer brake controller?

Although trailer brake controller reviews are brake controller installation,
designed to help you find the perfect brake controller, it would be wise to find out how to install it. The process is fairly simple, and the good news is that most of them come with an instruction manual.
It is advisable to install it on the dashboard, where you can easily view it without problems. How do trailer brake controllers work? Brake controllers come with four types of wiring, and understanding the wiring system is paramount. Here are the configurations:
Battery power: this is what supplies power to the brake controller.
Ground: this is the connector that will connect the brake controller to a grounded source, minus.
Trailer Feed: the Purpose of this connection is to supply power to the connector.
Brake switch: ultimately, this is what puts the brake on the trailer when you press the brake pedal.
Here are the steps to follow when installing the best brake controller:
Start by reading the manual so that you can understand the various connections and installation instructions.It is important to know where each wire goes.
Install where the wiring harness will be inserted, ideally under the dashboard. Most guides will guide you to your destination.
Under the dashboard, Unscrew the hex handle to remove the cover and access the ports.
Once the cover opens, you will find a block of electrical ports where you can connect your best trailer brake controller. After you connect the harness, you must re-install the cover in place.
The next step is to install the bracket, with most people finding the space under the radio ideal.
Connect the brake controller and check the device if it works as required. Start the car and press the stop button as well as the brake pedal to check if it works,rv brake controllers. The harness is what connects to the controller.
At the rear, install the trailer connector connector, there is a 7-pin connector that is needed to connect the controller to the trailer.
Use the bracket to install the internal wiring harness through the car’s bumper. This will make it easier to connect an external harness to the plug.How to fix trailer brakes? Find out how to read or watch the video I am sure that you will do it yourself.

As you can see, the process is quite simple and you can get the best brake controller working soon. If you are not sure about the wires and electrical connectors, you should call a specialist to install a brake controller for you. However, this is usually a simple and intuitive process.

What to consider Select the brake controller?

When you go in search of the best brake controller, you need to take a number of things into account.
This is very important and will help you make an informed decision when purchasing your trailer brake controller. Here are some of the main considerations:
Mounting:
Be sure to consider the type of mounting that is required with your brake controller. You need something that should be easy to mount and disassemble when not in use. If you find a trailer brake controller with a fastener that doesn’t require tools, it will be much better.
Key feature:
The type of features your device has makes it the best brake controller.
Look at the plug and play parameters, as well as other important functions such as mode selection; or electric or hydraulic.
How do brake controllers work?
Look at the self-diagnosis and alert functions that will alert you to any problems. Think about the sensitivity and power settings on the brake controllers.
Display:
We strongly recommend using models with a visible display. Choosing an led display is important and has many advantages. Regardless of the driving conditions you are in, you will be able to see the correct readings for the brake controller, even if you are driving in high light or dark at night. Operating mode:
You will get an electric or hydraulic brake controller. However, when you go through various reviews of the trailer brake controller , you will be able to find the right one. There are some models that have a combination of electric and hydraulic, and all you have to do is make sure that it is able to support each mode.
Brake axles:
Each trailer brake controller is designed for a specific number of axles on your trailer. It is extremely important to consider
since this will determine the amount of energy it will provide. For example, a 4-axis controller can be used on single-axis, three-seat, or even tandem tractors.
Recommendation,
As you can see, with the right guidance, finding the best brake controller is not difficult. There are so many models on the market, and we hope that the reviews of trailer brake controllers provided by us will be useful.
Best trailer brake controllers!
From the list above, we recommend Tekonsha 90195 P3 with electronic brake control If you find this review and buyer’s guide helpful, please leave a comment and share it every where what not to lose.

 

 

 

 

1 thought on “Best trailer brake controllers”

Leave a Reply

Your email address will not be published. Required fields are marked *